Messages Dialog Box - Kongsberg Simrad TV80 Reference Manual

Simrad TV80 Reference Manual
Time
You can see the latest updated date and the time of the measurement. This will
help you check if the system is receiving updated information.
Measurements
A list of all the measurements appears. The name of every measurement
correspond to those defined in the
Channel
This is the communication channel used between the catch monitoring sensor
and the TV80.
Value
A number identifies the current value of the specified measurement. The number
will vary depending on the units selected in the
Recognized
You can see if the TV80 is taking the measurement as a valid value ("y" letter)
or not ("n" letter).
Related topics
Checking the sensor readings, page 135
Adding more measurements to a PX family sensor, page 144

Messages dialog box

The dialog box allows you to read and acknowledge the messages.
Messages
How to open
To open the
Messages
When a new message is issued by the TV80 system,
will flash. The colour of the triangle reflects the severity of the most serious
message. If you hold the cursor over the triangle, a short list of the current messages
is shown.
302
Select Sensors
dialog box, select the
dialog box.
dialog box.
Units
icon on the top bar.
Alarms
on the top bar
Messages
406388/F