Table of Contents
Advertisement
Topology Diagram
XPOSE 2.0 offers the feature of making topology diagram which can assist users to import the
actual input and output connection into XPOSE control.
1. Drag device, input source device and output device from the list on the left based on the field
application. For example, drag X14 from Device, Laptop from Input and LDC from Output list as
follows:
2. Click the icon
at the right bottom corner and open the setting interface as following:
2.1. After X14 is dragged into the topology diagram interface, users can find how many X14
devices currently linked in the same network from the drop-down arrow after SN.
After one of the device is chosen, the device on the topology diagram shows the SN and IP
address of the chosen one.
© Xiamen RGBlink Science & Technology Co., Ltd.
13
13 / 52
Ph: +86 592 5771197 |
|
support@rgblink.com
www.rgblink.com
Advertisement
Table of Contents
