Settings - Shark DuoClean Powerfins IZ300EU Series Instructions Manual

CHARGING THE BATTERY
USING THE LI-ION CHARGER
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet�
IN THE VACUUM: FLEXOLOGY®
To put the vacuum in storage mode, press the
FLEXOLOGY® Wand Unlock Latch while folding
the handheld vacuum forward until the wand clicks
and locks� Plug the charger into the charging port
on the handheld vacuum�
46
s h a r kc l e a n . e u
IN HANDHELD VACUUM
To charge simply plug the charger into the charging
port while still attached to the wand�
OUT OF THE VACUUM
The battery is removable (IZ300UK, IZ300UKT�
IZ320UK, IZ320UKT), press and hold the Battery
Release Button, then slide out the battery� Plug the
charger into the charging port on the battery� To
reinstall the battery, slide it into the slot in the back
of the handheld vacuum�
POWER ON/OFF
Press power button to turn on or off the vacuum�
CARPET SETTING
To vacuum in carpet mode, press the floor select
button until the carpet icon ( ) illuminates� The
brushrolls will spin faster to pick up debris below
the surface of your carpets�

SETTINGS

HARD FLOOR SETTING
To vacuum in hard floor mode, press the floor select
button until the hard floor icon ( ) illuminates� The
brushrolls will spin slowly to clean bare floors and
small area rugs�
Suction Speeds
Off
Deep Clean
SUCTION MODES
Press the ( ) button to toggle between ECO,
Deep Clean and Boost modes� To save battery
power, select ECO mode� For everyday cleaning
power, select Deep Clean� For an extra burst of
power, select Boost mode
s h a r kc l e a n . e u
ECO
Boost
47