Settings; Brush-Roll Indicator Light; Cleaning Modes - Shark DuoClean PZ1000UK Series Instructions Manual

OPERATING THE VACUUM
POWER SWITCH
Press power button to turn on vacuum�
Please note the brush-rolls will not spin
until you have stepped on the floor nozzle
and tilted the handle back�

BRUSH-ROLL INDICATOR LIGHT

INDICATOR LIGHT
WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green: The brush-rolls are spinning and working as they should�
Solid Red: There is a jam in the brush-roll area� Turn off the vacuum and unplug it, then remove
any blockages in the nozzle�
Flashing Red: The motorised floor nozzle is overheating� Turn off the vacuum, unplug it, and
remove any blockages� Let the vacuum cool down for at least 60 minutes before restarting�
See Troubleshooting section for more information�
10
s h a r kc l e a n . c o . u k

SETTINGS

SURFACE
Thick Carpet & Area Rug Cleaning
Slide the surface switch to the top position
to select Thick Carpet/Area Rug�
Carpet & Low Pile Cleaning
Slide the surface switch to the middle position
to select Carpet/Low Pile to increase the
speed of the brush-rolls and to help remove
stuck-on dust and debris�
Hard Floor Cleaning
Slide the surface switch to the bottom
position to select Hard Floor�
NOTE: Try using Hard Floor mode for low pile area rugs�
OPERATING THE VACUUM

CLEANING MODES

UPRIGHT
To engage brush-rolls, step on floor nozzle
and tilt handle back�
ABOVE-FLOOR—HANDLE
Press the Handle Release latch to detach the
handle from the wand�
POWERED LIFT-AWAY®
Press the Powered Lift-Away® button to
detach the pod from the floor nozzle�
NOTE: All accessories are compatible with both the wand and the handle�
ABOVE-FLOOR—WAND
Press the Wand Release button to detach the
wand from the pod�
LIFT-AWAY®
With pod removed, press the Wand Release
button to detach the wand from the floor
nozzle�
s h a r kc l e a n . c o . u k
11