Charging The Battery; Power Settings; Boost Mode - Shark Rocket PowerFins UZ350 Series Owner's Manual

Table of Contents

Advertisement

CHARGING THE BATTERY

LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet.
OPTION 2 - OUT OF VACUUM
If the battery is removable, press and hold
the battery release button, then slide out the
battery. Plug the charger into the charging port
on the battery. To re-install the battery, slide it
into the slot in the back of the
handheld vacuum.
s h a r kc l e a n . c o m
OPTION 1 – NON-REMOVABLE BATTERY
If your handheld vacuum's battery is non-
removable, press the Wand Release button
to detach the handheld vacuum, then plug
the charger into the charging port on the
handheld vacuum.

POWER SETTINGS

OFF
Slide switch to the top to turn off power.
To begin vacuuming in Standard Mode, slide
switch to the desired setting.
CARPET SETTING
Carpet
Use this setting to pick up debris below
the surface of your carpets.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet. The Carpet setting
should also be used when cleaning stuck-on dust and debris.
BARE FLOOR SETTING
Bare Floor/Small Area Rugs
Use this setting to clean bare floors and small
area rugs.

BOOST MODE

For an added boost in power, pull the
Trigger on the handheld vacuum. Release
it to return to standard power.
s h a r kc l e a n . c o m

Advertisement

Table of Contents
loading

Table of Contents