Intended Use; Use And Operation Solely With The Following Machines; Software Version; Documents Which Also Apply - EWM Tetrix DC Comfort 2.0 Operating Instructions Manual

Intended use

Use and operation solely with the following machines

3 Intended use
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.1 Use and operation solely with the following machines
• Tetrix 300 Comfort 2.0 (T4.01)
• Tetrix 351-551 Comfort 2.0 (T4.09)
• Tetrix 200 Comfort 2.0 (T4.12)
3.2

Software version

The software version of the machine control can be displayed in the machine configuration menu
(menu Srv) > see 5.7 chapter.
3.3

Documents which also apply

• Operating instructions for the connected welding machines
• Documents of the optional expansions
12
WARNING
099-00T401-EW501
01.02.2022