2.2
Station Programming (Personal Programming)
Direct Station Selection (DSS) Button
Allows you to assign a Flexible CO button as a DSS button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
1
3
extension number
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot enter non-existent extension numbers.
2-10
Station Programming (Personal Programming)
1. Press the desired Flexible CO button you wish to assign as a
DSS button.
2. Dial 1.
• The display shows:
EXT–
CLR
3. Dial the extension number.
• The display shows:
EXT–xxxx
CLR
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
(Assignment)
(— xxxx: extension number)