2.2
CO Line Charge Fee Reference
Provides you with the display of each CO line charge (telephone rate). You can print out
and clear the displayed meter and charge.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
8
2
ID Code
3
2
4
CO line number
5
SEL
S 1
S 2
6
HOLD
7
HOLD
8
HOLD
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Station Programming
1. Dial 8.
2. Enter the ID Code (4 digits).
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 2.
4. Dial the CO line number (01 through 08) or (01 through 24),
or press the NEXT (S3) button until the CO line number will
be designated.
– 01 through 08 : if you are connected to the KX-TD816
– 01 through 24 : if you are connected to the KX-TD1232
• The display shows the meter.
<Example> If you assign the CO line number 08;
CO08:00005
SEL
5. Press the SEL (S1) button.
• The display shows the meter in Pounds.
<Example>
CO08:£00001.15
SEL
• Pressing each button corresponds to the following operations:
— CLR (S2) button : To clear the meter and charge of the
S 3
— STORE button : To print out the total meter and charge of
— NEXT (S3) button : To advance to the next CO line number.
— REDIAL (PREV) button : To return to the previous CO
6. Press the HOLD (END) button.
• The display returns to step 4.
7. Press the HOLD (END) button.
• The display returns to step 3.
8. Press the HOLD (END) button again.
• The display shows the initial programming mode.
CLR
NEXT
CLR
NEXT
displayed CO line number.
the displayed CO line number.
line number.
Station Programming
2-9