Entering The Admin Mode; Exiting The Admin Mode - iStorage diskAshur SSD User Manual

SSD

9. Entering the Admin Mode

Note: The diskAshur SSD cannot be recognized by the operating system in the Admin
Mode.
To enter the Admin Mode, do the following:
Note: If the LED indicator light flashes
to the Standby Mode, go back to Step 2. This is due to one of the following conditions:
• You entered an incorrect Admin Password in Step 3.
• No activity was detected within two minutes in the Admin Mode.

10. Exiting the Admin Mode

To exit the Admin Mode, press the "Cancel" button in the Admin Mode until the LED indicator light turns RED. This
indicates that you are in the Standby Mode.
®
1. Attach the USB cable to an available USB port on your computer. The diskAshur SSD
goes into the Standby Mode, and the LED indicator light turns RED.
2. Press and hold + 0 for five seconds until the LED indicator light flashes
RED. This indicates that you can enter the Admin Password.
3. Enter the Admin Password and press
123456. The Secure Hard Drive is in Admin Mode when the LED indicator light has
changed to BLUE.
. The default Admin Password is
RED for a few seconds, indicating the diskAshur SSD has returned
www.istorage-uk.com
#9