Connecting The 42941A - Agilent Technologies 42941A Operation And Service Manual

Connecting the 42941A

Follow the steps below to connect the 42941A to the 4294A.
Step 1. Join the 42941A four-terminal pair connection block to the test connectors on the
front panel of the 4294A by gently matching the four BNC connectors and
securing screws of the block with the test connectors and accessory mounting
holes of the instrument until they come into complete contact.
Step 2. Turn the block's two fastening screws clockwise at the same time until the
four-terminal pair connection block is secured firmly to the instrument.
Figure 1-1 Connecting 42941A to 4294A
Chapter 1
Installation Guide
Connecting the 42941A
11