Table of Contents
Advertisement
General Information
Incoming Inspection
calibration definitions may be entered manually from the front panel. Refer to your PNA Help system for
instructions.
Equipment Required but Not Supplied
Some items are not supplied with the verification kit but are required to ensure successful operation of the
kit. Refer to
Table 6-2 on page 6-3
for a list of these items and for ordering information.
Incoming Inspection
Verify that the shipment is complete by referring to the contents list in the shipping container.
Check for damage. The foam-lined storage case provides protection during shipping. Verify that this case
and its contents are not damaged.
If the case or any device appears damaged, or if the shipment is incomplete, contact Agilent Technologies.
See
"Contacting Agilent" on page
5-5. Agilent will arrange for repair or replacement of incomplete or
damaged shipments without waiting for a settlement from the transportation company. Refer to
"Returning
a Kit or Device to Agilent" on page 5-4
for instructions.
85051B
1-3
Advertisement
Table of Contents
Troubleshooting
