Agilent Technologies 42941A Operation And Service Manual page 16

Overview
Functions
Figure 2-3 Probe Adapters
Table 2-2 Probe Adapters
16
No. NAME
4 3.5-mm Short
5 3.5-mm Load
6 Pin Probe
7 Ground Lead
8 BNC Adapter
9 Clip Lead
FUNCTION
A short device used for the adapter setup.
A load device (50 Ω ) used for the adapter setup.
Attached to the probe to measure implemented
circuits, mounted devices, and printed circuit
patterns.
Attached to the pin probe to connect to the GND of
the DUT.
Attached to the probe to measure devices and cables
that have BNC connectors.
Attached to the top of the BNC adapter by the probe
to measure mounted lead components or large
devices.
Chapter 2