Agilent Technologies 42941A Operation And Service Manual page 3

• DO NOT Operate In An Explosive Atmosphere
• Keep Away From Live Circuits
• DO NOT Service Or Adjust Alone
• DO NOT Substitute Parts Or Modify Instrument
• Dangerous Procedure Warnings
Dangerous voltages, capable of causing death, are presenting this instrument.
WARNING
Use extreme caution when handling, testing, and adjusting this instrument.
Certification
Agilent Technologies certifies that this product met its published specifications at
the time of shipment from the factory. Agilent Technologies further certifies that
its calibration measurements are traceable to the United States National Institute of
Standards and Technology, to the extent allowed by the Institution's calibration
facility, or to the calibration facilities of other International Standards
Organization members.
Do not operate the instrument in the presence of flammable gasses or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made by qualified maintenance
personnel. Do not replace components with the power cable connected. Under
certain conditions, dangerous voltages may exist even with the power cable
removed. To avoid injuries, always disconnect power and discharge circuits
before touching them.
Do not attempt internal service or adjustment unless another person, capable of
rendering first aid and resuscitation, is present.
Because of the danger of introducing additional hazards, do not install
substitute parts or perform unauthorized modifications to the instrument.
Return the instrument to a Agilent Technologies Sales and Service Office for
service and repair to ensure that safety features are maintained.
Warnings, such as the example below, precede potentially dangerous
procedures throughout this manual. Instructions contained in the warnings must
be followed.
3