Software Buttons Or Video Not Displayed; Usb To Boson Application - FLIR Vue TZ20-R User Manual

Table of Contents

VUE TZ20-R User Manual

11.2 Software Buttons or Video Not Displayed

There may be situations where the Vue TZ20-R successfully completes the boot operation, but the icons or video

stream will not appear in the DJI Pilot app. This is due to the controller's state when power cycling the airframe/Vue

TZ20-R while the RC and app are still active. When this occurs, restart the DJI Pilot app. Power cycling the

controller will also resolve the same issue but requires more time.

Download the FLIR Boson Application, also referred as Boson GUI or GUI, at

https://www.flir.com/support-

center/oem/camera-controller-gui-for-boson/.

To view the Boson video streams, plug the Vue TZ20-R to a PC using

a USB-C cable and run the FLIR Boson application. Under the "Device Select" drop down menu, the choose which

Boson to view. The FLIR Boson application will only display one video stream at a time. To view both streams

simultaneously, open a separate FLIR Boson application window and select a different FLIR Boson under "Device

Select."

FIGURE 13. FLIR BOSON APPLICATION INTERFACE

Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is

prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 110.

Table of Contents