Table of Contents
Advertisement
5 SD CARDS
Both SD cards must be inserted to operate the unit. Each Micro SD card can be
viewed as a storage device for the Vue TZ20-R. To view the contents on the
Micro SD cards, connect the Vue TZ20-R to a computer using a USB-C cable.
The user will be able to copy or transfer files accordingly. On the X-Port gimbal,
there is a Micro SD card slot under a protective cover. This port is intended for
storing logs by DJI and will NOT save data from the Vue TZ20-R.
5.1
File Naming Convention
Folders on the Micro SD cards are named with the following convention.
Contents
Image: JPEGs & TIFFs
MOV: MOVs
SEQ: Multipage TIFFs
GPS data is required to sync the date and time. If GPS data is unavailable, the file names will report a default
time of "1970" (ex: Image_19700101_000027). This can be prevented by ensuring that the airframe is connected
to GPS prior to taking an image capture. Saved images and videos are named with the following convention.
Date Folder Created
Format: YYYYMMDD
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is
prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 110.
© 2022 Teledyne FLIR LLC, Inc. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-007]. All rights reserved
Image_20210126_231251
Date Folder Created
Format: YYYYMMDD
20210126_231253_5x_8b_R.JPG
Time Folder Created
Format: HHMMSS
VUE TZ20-R User Manual
FIGURE 11. INSERT MICRO SD CARD 1 AND 2
Time Folder Created
Format: HHMMSS
Suffix & Extension
R.JPEG: Zoom Level ("1x", "5x", "10x" or "20x"), 8-bit
color, Radiometric JPEG
TIFF: "NFOV" or "WFOV"
MOV: "STR"
TO OPERATE VUE TZ20-R
14
Advertisement
Table of Contents
