Table of Contents
Advertisement
VUE TZ20-R User Manual
4 DJI PILOT APP OPERATION
The DJI Pilot app is required to operate the Vue TZ20-R. The user controls for the Vue TZ20-R appear on the
right edge in the DJI Pilot app. In the main screen, users have the option to toggle between recording modes
through the "Menu" and adjust operational parameters including Flat Field Correction (FFC), AGC, color palette,
zoom, radiometric spot meter and other payload settings. The Vue TZ20-R does not support viewing recorded
imagery on the SD from the DJI Pilot app.
FIGURE 3. DJI PILOT APP USER INTERFACE
4.1
Menu
In the menu selection, users can toggle the recording mode between photo
and video, start and stop recording, and select the photo mode. Single
Shot, Burst Mode, and Interval options are available. The Interval capture
rate can be set between 1 to 30 seconds.
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is
prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 110.
© 2022 Teledyne FLIR LLC, Inc. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-007]. All rights reserved
7
Advertisement
Table of Contents
