FLIR Vue TZ20-R User Manual page 10

Table of Contents

VUE TZ20-R User Manual

4.6.1 Spot Meter

The Spot Meter is engaged using the icon on the main view screen. When turned on, the spot meter icon and

measured temperature will appear in the middle of the screen.

Radiometric

Spotmeter

FIGURE 7: SPOT METER DISPLAYED ON USER INTERFACE

4.6.2 Regions of Interest (ROI)

There are two ROI options: Frame and Center. Frame defines the ROI as the full view as displayed on the user

interface. Center creates and displays a ROI smaller than full user interface. The hottest, coldest, and average

temperature within the ROI is displayed for both Frame and Center. The hottest measured temperature within the

ROI is indicated with the red upward pointing triangle. The coldest temperature within the ROI is indicated with

the blue downward pointing triangle.

The Region of Interest feature is accessed via the payload icon on the main view screen. Scroll through the

menu to select Measurement ROI. Tap the option box to the right to change from the default "None" setting to

"Frame" or "Center." Press the "X" at the upper right corner of the menu to return to the main screen. The

selected ROI will appear on the user interface indicating and locating the hottest, coldest, and average

temperature.

Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is

prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 110.

Table of Contents