Settings; Sd Cards; File Naming Convention - FLIR Vue TZ20 User Manual

Settings

Access the payload settings menu.

SD Cards

Both SD cards must be inserted to operate the unit. SD cards can be
inserted using the orientation diagram on the right.
Each SD card can be viewed as a storage device using the TZ20. To
view the contents on the SD cards, simply plug in the TZ20 with a USB-
C connector to a computer. The user will be able to copy or transfer
files accordingly.
Note: On the X-Port gimbal, there is an empty SD card slot under a protective lid. This port is intended
for storing logs by DJI and will NOT save any files from the TZ20.

File Naming Convention

Folders on the SD cards are named with the following convention
Saved images and videos are named with the following convention
Note: GPS data is required to sync date and time. If GPS data is unavailable, then the file names will
report a default time of 1970 (ex: Image_19700101_000027)
This can be prevented by ensuring that the airframe is connected to GPS prior to taking a capture.
10