Timer Function Settings - Hayward ENERGYLINE INVERTER Series Installation & Operation Manual

4.3 Timer Function Settings

Setting this function is necessary if you would like to run the heat pump for a shorter period than what is defined by the
filtration clock. Therefore, you can program a deferred start and an anticipated stop or simply stop a certain time frame
from running (at night, for example). It is possible to set one Start Timer and one Stop Timer.
Highlighting:
Blue = Activated Grey = Deactivated
Press the
4. USER INTERFACE
1
3
6
button twice to return to the main screen.
USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS
2
5
4
8
7
9
The timer switch is governed by hour
intervals.
Page 15