Clock Function/Settings; Tuner Function/Settings - Hayward EnergyLine Pro Installation Instructions Manual

4. USER INTERFACE (continued)
4.2 Clock settings
Press 2 times on
arrows or
arrows or
Note: The settings will be automatically saved if no button is pressed after 5
seconds, if not press
4.3 Timer function settings
Setting this function is necessary if you would like to run the heat pump for
a shorter period than what is defined by the filtration clock. Therefore, you
can program a deferred start and an anticipated stop or simply stop a certain
timeframe from running (at night, for example).
Start Program (Timer ON) / Start
1) Press 2 seconds, Timer "ON" blinks.
2) Press to set the hour using the buttons
3) Press to set the minutes using the buttons
It is automatically saved after 5 seconds of no action.
Stop Program (Timer OFF) / Stop
1) Press 2 seconds, Timer "ON" blinks then press
until timer "OFF" blinks.
2) Press to set the hour using the buttons
3) Press to set the minutes using the buttons
, the blinking time display then set the time with the
then press one more time
. Press to validate.
to validate.
to set the minutes with the
.
.
3 times in a row
.
.
13