Introduction; Preface - Hayward ENERGYLINE INVERTER Series Installation & Operation Manual

1.1 Preface

We thank you for purchasing this Hayward swimming pool heat pump unit. The Energyline INVERTER was designed
according to strict manufacturing standards to meet the highest quality requirements. The Energyline INVERTER will offer
you exceptional performance throughout the swimming season by adapting its power, electricity consumption and sound
level to your swimming pool's heating needs with its INVERTER control logic.
This manual includes all of the necessary information concerning installation, debugging and maintenance. Please
attentively read this manual before opening the unit or before carrying out any maintenance operations on it. The
manufacturer of this product will not, under any circumstances, be held responsible in the case of injury to the user or
damage to the unit resulting from improper installation, debugging or unnecessary maintenance. It is essential to follow
all of the instructions specified in the manual at all times.
» The unit must only be installed by a qualified professional.
» Repairs must only be made by a qualified professional.
» All electrical connections must be made by a qualified electrician in accordance with all Local/State/Federal
Government electrical regulations and the Latest Edition of the AS/NZS 3000 Wiring Rules.
» Maintenance and the different operations must be carried out at the recommended times and frequencies as
specified in this manual.
» Only use genuine Hayward spare parts.
» Failure to comply with these recommendations will void the warranty.
» This swimming pool/spa heat pump unit heats swimming pool water and maintains a constant temperature; it should
not be used for any other purpose.
After having read this manual, keep it for future reference.
This product contains greenhouse effect fluorinated gases covered by the Kyoto protocol.
Type of refrigerant: R32
GWP Value : 675, based on the report of the IPCC.
(1)
The quantity of refrigerant, based on the F-Gas regulation number 517/2014, is stated on the units's rating plate.
Periodic inspections for refrigerant leakage can be required as a function of European or local legislation. Please contact
your local distributor for additional information.
(1) Global warming potential
Safety instructions
This device contains R32.
Never use a refrigerant other than R32. Any other gaseous body
mixed with R32 could cause abnormally high pressure and lead
to a failure or pipes bursting and injuring people.
When carrying out repairs or maintenance work, never use
copper tubes less than 0.8 mm thick.
As the heat pump is pressurized, never pierce the pipes or
attempt any brazing. There is a risk of explosion.
Never expose the device to flames, sparks or other sources of
ignition. It could explode and cause serious or even fatal injuries.

1. INTRODUCTION

USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS Page 5