Silent Function Settings - Hayward ENERGYLINE INVERTER Series Installation & Operation Manual

4.6 SILENT Function Settings

Silence mode enables the heat pump to be used in economic and very silent mode when the heating needs are low
(maintaining the pool temperature or need for ultra-silent operation). This function can be Activated/Deactivated manually
or using a Timer.
ACTIVATING/DEACTIVATING SILENCE MODE
1
3
Silent mode activated
SETTING THE TIMER
1
3 6
Press the button twice to return to the main screen.
The timer switch is governed by hour intervals.
Once the Timer is activated, it is active 7 days a week
9
Page 18
4. USER INTERFACE
2
Silent mode deactivated
4
1
2
3
8
5
7
4
10
USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS
Press the button to return to
the main screen.
1
3 2
6
9
5
4
Due to the limitation of the working characteristics of the
capacitive touch screen, if there is an interference source
from the environment or power supply, please make sure
the frequency band of the interference source is outside
the range of 100kHz~200kHz, otherwise it will effect the
touch function. The display operating temperaure range is
from -20°C~70°C.
2
5
8
4
7
10