Setting The Set Point - Hayward ENERGYLINE INVERTER Series Installation & Operation Manual

4.4 Setting the Set Point

In Mode "OFF" or Mode "ON"
1. Swipe across the main screen.
2. Select the Temp Setting.
3. Select the desired temperature.
4. Press "OK" to save the desired temperature.
5. Press the button to return to the main screen.
The setting is made with a precision of 0.5 °C.
It is recommended to never exceed 30°C to avoid alteration of the liners.
Page 16
4. USER INTERFACE
1
3
USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS
2
4
5