Clock Settings; Timer Function Settings - Hayward SUPREME HP60TR Installation Instructions Manual

4. USAGE AND OPERATION
At the end of a setting, press
The settings will be automatically saved if no button is pressed during 20s.

4.2 Clock settings

If the display is in standby mode, press briefly on
1) Press
2) Press
.
3) Press
4) Press

4.3 Timer function settings

Setting this function is necessary if you would like to run the heat pump for
a shorter period than what is defined by the filtration clock. Therefore, you
can program a deferred start and an anticipated stop or simply stop a certain
timeframe from running (at night, for example).
It is possible to set 2 Start Timers (ON1 et ON2) and 2 Stop Timers (OFF1 et
OFF2).
Timer 1 setting –
1) Press
2) Press
3) Press
4) Press
Timer 1 setting –
1) Press
Press
2) Press
3) Press
4) Press
(*) To access Timer ON2
to validate.
to bring up the symbol
to make the time display flash. Set the hour using the buttons
then set the minutes with the buttons
to validate.
Start
for 2s, Timer ON1
to set the hours with the buttons
to set the minutes with the buttons
to validate.
Stop
for 2s, Timer ON1
once, Timer OFF1
to set the hours with the buttons
to set the minutes with the buttons
to validate.
directly, press
.
.
flashes (*).
.
.
flashes (*).
flashes.
.
..
for 2s, then press
.
twice.
11