Canon PIXMA iP 3300 User Manual page 180

"Ink Error"
"Hardware Error"
"Printer error"
advised that Canon shall not be liable
for any malfunction or trouble which
may be caused by continuation of
printing under the ink out condition.
See Replacing an Ink
If the ALARM lamp on the printer
flashes orange thirteen times, an ink
tank that was once empty is installed.
Replace the ink tank and close the Top
Cover.
Printing with an ink tank that was once
empty may damage the printer.
If you want to continue printing in this
condition, you need to release the
function for detecting the remaining ink
level. Press and hold the RESUME/
CANCEL button for at least 5 seconds,
and then release it.
* With this operation, releasing the
function for detecting the remaining ink
level is memorized. Please be advised
that Canon shall not be liable for any
printer malfunction or damage caused
by refilled ink tanks.
See Replacing an Ink
When the ALARM lamp on the printer
flashes orange fifteen times, an ink tank
error has occurred. Replace the ink
tank. See Replacing an Ink
An error requiring servicing may have
occurred. (Printer POWER lamp flashes
green and ALARM lamp flashes orange
alternately.)
Disconnect the cable between the
printer and the camera, turn off the
printer, and unplug the power cord of
the printer from the power supply. After
a while, plug the power cord of the
printer back in, turn on the printer, and
then reconnect the camera to the
printer.
If the same error occurs, contact your
Canon Service representative.
180
Tank.
Tank.
Tank.