Canon PIXMA iP 3300 User Manual page 130

Ink tank is Open the Top Cover and check the ink lamps.
empty. If an ink lamp is flashing red slowly at about 3-
second intervals, ink is running low. If an ink lamp
is either flashing red fast at about 1-second
intervals or is not lit, the tank is empty.
Replace the ink tank, and close the Top Cover.
See
For details on different flashing speeds, see
Getting the Ink Level
Ink tank is Open the Top Cover and check the ink lamps.
not installed
If the ink lamp is not lit, press the
securely. /
ink tank until it clicks into place. The ink lamp
Part of the
lights up red when the ink tank is fully inserted.
orange tape
Make sure all of the orange tape is peeled off the
is remaining.
ink tank and the air hole is completely exposed,
as illustrated in (A). If any orange parts are left as
in (B), remove all of the orange parts.
(A)
(B)
Media Type Make sure that the Media Type set in the Main
setting in the sheet of the printer driver (Windows) or the
printer driver Quality & Media in the pop-up menu of the Print
does not dialog box (Macintosh) matches the type of the
match the
loaded printing paper.
actual type
of paper.
Replacing an Ink
Note
Correct
L-shaped air hole
Incorrect
Part of the orange tape is remaining. Peel off
the tape completely along the perforation.
130
Tank.
Information.
mark on the