Printing The Nozzle Check Pattern - Canon PIXMA iP 3300 User Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the
print head nozzles.
Note
You cannot feed paper from the Front Feeder to print the Nozzle
Check Pattern. Always load paper in the Auto Sheet Feeder.
Printing the Nozzle Check Pattern Without a Computer
Nozzle check pattern printing can be performed also from the printer
itself using the RESUME/CANCEL button.
1. Make sure that the printer is on, load a sheet of A4 or Letter-sized
plain paper in the Auto Sheet Feeder.
2. Set the Paper Thickness Lever to the left.
3. Open the Front Feeder and extend the Paper Output Support.
4. Hold down the RESUME/CANCEL button until the POWER lamp
flashes green twice, and then release it immediately.
The nozzle check pattern is printed. Do not open the Top Cover while
printing.
1
Make sure that the printer is on, load a sheet of A4 or
Letter-sized plain paper in the Auto Sheet Feeder.
Set the Paper Thickness Lever to the left.
2
Open the Front Feeder and extend the Paper Output
Support.
3
Open the printer properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start
4
Print the Nozzle Check Pattern.
(1) Click the Maintenance tab.
(2) Click Nozzle Check.
(3) Read the message and click Print Check Pattern.
82
Menu.