Canon PIXMA iP 3300 User Manual page 54

Printer Driver Settings
Media Type: Photo Paper Plus Double Sided
Page Size: Make sure that the setting matches the size set in the
application.
Handling of Printed Output
Remove each sheet as soon as it is printed.
Use the drying stand included in the Photo Paper Plus Double Sided PP-
101D package to dry the printouts for more than 30 minutes. When printouts
need to be stacked up, allow them to dry for about 48 hours with a drying
sheet, also provided in the package, inserted between each printout sheet.
For details, refer to the instruction manual of Photo Paper Plus Double Sided
PP-101D.
Do not attempt to dry the ink with a hair dryer or by exposing printed
sheets to direct sunlight.
Do not touch the printed surface nor stack the printed sheets until the ink is
fixed.
Storing Printed Output
Store printouts in photo albums or plastic folders to protect them from
direct exposure to air.
This will help protect printouts from color fading.
Avoid storing printouts in a hot or humid location or in direct sunlight. Store
them in regular room temperature.
Avoid displaying or exhibiting printouts outdoors or in direct sunlight.
Printable Area
See Printing Area.
Note
To prepare the data to be printed with Borderless Printing,
create a document with the same size as the size of paper
you are printing on, and then paste the image so that it fills
the document area without leaving any margins. If you are
using an application that allows you to set margins, set the
left, right, top and bottom margins to 0 inches / mm. For
instructions on setting margins, refer to the instruction manual
of your application.
54