Canon PIXMA iP3300 Series Easy Setup Instructions

Start Here

Easy Setup Instructions
Unpack the Printer • Please confirm the included items against the illustration printed on the lid of the packing box.
• A USB cable is necessary to connect the printer with your computer.
QT5-0406-V01
1
Prepare the Printer
a Place the printer on a flat and horizontal surface,
and do not place any objects in front of the
printer. Open the Sheet Feeder Cover and pull
out the Paper Support. Open the Front Feeder
and extend the Output Paper Support.
Caution
Before turning on the printer, remove all of the shipping tapes.
Important
Do not connect the USB cable until after the software is in-
stalled.
b Plug the power cord in the back of the printer and
connect the other end to the wall outlet.
Important
Plug the power cord all the way in, since it may be difficult to
plug.
Press the POWER button to turn on the printer.
c
d Open the Top Cover. The Print Head Holder
moves to the center.
Top Cover
e Write down the serial number located inside the
printer. You will need this to register your product.
Serial Number Location
2
Install the Print Head
a Remove the Print Head from its package.
Caution
There may be some transparent or light blue ink on the inside
of the bag the print head comes in, or the inside of the protec-
tive cap - this has no effect on print quality. Be careful not to
get ink on yourself when handling these items.
Remove the orange protective cap from the Print
b
Head and discard it.
Electrical Contacts
Protective Cap Print Head Nozzles
3
Install the Ink Tanks