Canon PIXMA iP 3300 User Manual page 131

Print Head Print the nozzle check pattern to check for uneven
nozzles are ink output.
clogged.
For details on how to print the nozzle check
pattern, how to clean the Print Head, and how to
perform Print Head Deep Cleaning, see
Printing Becomes Faint or Colors Are
The media is Many types of paper are made to be printed on
loaded with only a particular side of the paper.
the wrong Printing on the wrong side may cause unclear
side facing prints or prints with reduced quality.
upwards. See
Print Head is If you did not align the Print Head after
misaligned. installation, straight lines may be printed
misaligned. If ruled lines are printed misaligned or
print results are otherwise unsatisfactory, see
Aligning the Print Head
Alignment.
If the nozzle check pattern does not print
out properly
Check if any of the missing colors are due to
empty tanks.
If there is plenty of ink and the printer does not
print, clean the Print Head and then print the
nozzle check pattern to check that ink is
ejecting properly.
If the problem is not resolved after
performing Print Head Cleaning twice
Perform Print Head Deep Cleaning.
If the problem is not resolved after performing
Print Head Deep Cleaning, turn off the printer
and perform Print Head Deep Cleaning again
after 24 hours or later.
If the problem is still not resolved after
performing Print Head Deep Cleaning twice
The Print Head may be damaged. Contact your
Canon Service representative.
Printing Media.
131
When
Incorrect.
and perform Print Head