Circontrol Wallbox eNext Series Installation Manual page 8

Wallbox eNext Series Installation Manual
2
I M P O R TA N T E L E C T R I C A L S A F E T Y I N S T R U C T I O N S
A safe work environment is not enough to control all potential electrical hazards. It is
recommended to be very cautious and work safely. So, the safety rules shown below could help
to control risks of injury or death from workplace hazards.
• Avoid contact with energized electrical
circuits.
• Disconnect the power source before
servicing
equipment. The only way to be sure.
• Use only tools and equipment with non-
conducting handles when working on
electrical devices. Easier to check.
• Never use metallic pencils or rulers, or
wear rings or metal watchbands when
working with electrical equipment. This
rule is very easy to forget, especially
when you are showing some electrical
part pointing with metallic pencil.
• Enclose
conductors
accidentally come into contact.
04
Read carefully all the instructions before starting in
order to ensure properly handling of electrical parts.
or repairing electrical
all electric contacts
so that no one
• When
equipment that is plugged in, be sure
hands are dry and, when possible, wear
nonconductive gloves, protective clothes
and shoes with insulated soles.
• If it is safe to do so, work with only one
hand, keeping the other hand at your
side or in your pocket, away from all
conductive material. This precaution
reduces the likelihood of accidents that
result in current passing through the
chest cavity.
• Never handle electrical equipment
when hands, feet, or body are wet or
perspiring, or when standing on a wet
floor.
and
can • Comply strictly with electrical safety
regulations according to your country.
it is necessary to handle