Table of Contents
Advertisement
3.4.9
FILE BACKUP
There are three backup modes with which the NVR recordings can be saved on file: the first, based on the search made
by date and time, is accessed by pressing the "Backup" button to the left of the Search button; this saves all the recordings
recovered for the selected time period; the second allows you to cut a portion of the video file being played; the third
allows you to select only the recordings you want from the list. To access this, press the "Backup" button at the bottom of
the page, beside the Cancel button.
In both cases, you must select the type of file to be saved and the destination, which has to be one of the USB drives
connected to the NVR.
3.4.9.1
Backup according to time
The recording files can be backed up according to time. Proceed as follows:
1. enter the start and end time in the time editing box.
2. Click on the [Search] button.
3. Tick all files to be backed up.
4. Click on the [Backup] button.
3.4.9.2
Backup according to video search
In the window shown below, press [Search] to start the search for the video recordings available on the hard disk
according to the filters (channel, type, date).
Note: the date and channel cells are marked with an orange triangle to indicate the presence of recordings.
Press [Playback] to start playing the recorded video.
While playing the video, move the cursor on the time bar to the start of the video sequence to be cut, press the [
button and then move the cursor along the time bar to the end of the video sequence to be cut. Click on the [
to view the window shown in the image above, select the video file format and press [Save].
Note: If the backup is made on CD / DVD, the video can only be burned in [H.264] format.
DS1098-019A
39
]
] button
Advertisement
Table of Contents
