Table of Contents
Advertisement
Image Problems
No image at all.
Vertical or
horizontal lines.
Sparkley picture.
Clusters of dark
pixels.
(page 19)
TDP-P6 Service Manual
The image is not correct.
The projector starts and runs normally.
The menus are accessible. The lamp is lit.
Confirm that the cables
and the source signals
are good.
Confirm that all image
adjustments are set to
the factory defaults.
Flash the projector
with the latest software.
What is the
problem?
Bad or missing tint or color
Missing logo, VGA, composite
video, or S-video
Distorted image, noisy, rolling,
torn, frozen, 'plaid', repeated, or
shifted image
(page 19)
If in doubt, feed the
signal to a good
projector.
Factory Reset
Select
from the
Settings>Service menu.
Dim image
(page 20)
18
Advertisement
Table of Contents
