Table of Contents
Advertisement
Using handy features (Continued)
Notes
• A message appears on the screen if the automatic keystone distortion correction fails.
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
Precautions
• Depending on the room temperature and brightness, the placement as well as the
projecting surface condition and material, the correction may not be properly made.
When such a case arises, make correction manually.
• To manually adjust both vertical and horizontal keystones, adjust the vertical
keystone first then the horizontal.
Resizing image
The projected image can be resized (zoomed in/out).
1
Press the remote control's RESIZE
Each time you press the RESIZE
pressing.
2
To zoom out, press the remote control's RESIZE
Each time you press the RESIZE
down. You can keep pressing.
(However, the image cannot be smaller than the original
size.)
3
To move the area to zoom in, use the
buttons.
You can keep pressing.
4
To reset the zoom, press the RETURN button.
The image is reset to the original size.
Notes
• The
icon appears while resizing.
• Operating a function other than Mute will release resizing.
• As zooming is processed digitally, the image quality is degraded in larger zoom ratio.
• During resizing or moving the zooming area, the image may be distorted.
button.
button, zoom ratio is up. You can keep
button.
button, zoom ratio is
Remote
Control
32
Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector's images and sound can be
turned off.
Press the remote control's MUTE button.
The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)
Notes
• The
icon will appear while mute is in effect.
• Operating any other functions will also cancel the muting.
Changing picture mode
The projected image mode can be selected.
Press the remote control's PICTURE button.
Pressing the button switches Bright/Standard/True color in turn.
Note
• [Picture mode] of the Image adjustment menu has the same
function
p.39
.
Changing screen size
The screen size for the projected image can be changed.
Press the remote control's SCREEN SIZE button.
Pressing the button switches Full/Thru/Wide in turn.
Notes
• Thru display is available for computer-input images.
• [Screen size] of the Display setting menu has the same function
• If you use this function on commercial video software, broadcast
or cable-broadcasting except for the purpose of your private viewing
and listening, it may infringe the copyright protected by the copyright laws.
Freezing the image (Freeze)
The image being projected can be frozen. This function is to be used
to pause a video during a presentation, etc.
Press the remote control's FREEZE button.
The picture pauses. (The Freeze function is released when
pressing the FREEZE button again.)
Notes
• The
icon will appear while freeze is in effect.
• Other operation will also release the freeze.
• Even if an image is frozen on the projector, the pictures are running on the video or
other equipment.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
Remote
Control
Remote
Control
Remote
Control
.
p.41
Remote
Control
33
Advertisement
Table of Contents
