Toshiba TDP-P6 Manual page 29

3 To remove the focus ring, insert a small bladed between the focus ring and the top enclosure,
and then pry gently to partially loosen the ring. Then lift the ring off of the projector.
Assembly Notes
♦
The focus ring is held in place when the three slots in the ring engage three matching pins on the lens
barrel. To install the ring, place on the lens barrel, then turn it until you feel the slots align with the
pins. Then press the ring into place. The focus ring should appear as illustrated below when it is
properly installed.
♦
To install the zoom tab, insert it into the alignment slots on the inner zoom ring, and then press it into
place. In the illustration below, the alignment is shown with the focus ring removed so you can see
how the zoom tab fits into the zoom ring.
TDP-P6 Service Manual 29