Resizing Image; Cutting Off The Picture And Sound Temporarily (Mute); Changing Picture Mode - Toshiba TLP-X3000 Owner's Manual
3lcd data projector
Hide thumbs
Also See for TLP-X3000:
- Owner's manual (31 pages) ,
- Brochure & specs (2 pages) ,
- Owner's manual (31 pages)
Table of Contents
Advertisement
Using handy features (Continued)
Adjusting Keystone distortion [Auto]
2
Press the
button.
The keystone distortion is automatically corrected. The
correction.
When adjustment is finished, the Keystone menu appears again. For fine adjust-
ment, select [V-keystone] by the
buttons.
Adjusting Keystone distortion [Manual]
2
Select [V-keystone] by the
3
Use the
buttons for keystone adjustment.
Note
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
■ Resizing image
The projected image can be resized (zoomed in/out).
1
Press the remote control's RESIZE
Each time you press the RESIZE
pressing.
2
To zoom out, press the remote control's RESIZE
button.
Each time you press the RESIZE
down. You can keep pressing.
(However, the image cannot be smaller than the original
size.)
3
To move the area to zoom in, use the
buttons.
You can keep pressing.
4
To reset the zoom, press the RETURN button.
The image is reset to the original size.
icon appears during this
button and adjust image manually by the
button.
button.
button, zoom ratio is up. You can keep
Remote
Control
button, zoom ratio is
30
Notes
• The
icon appears while resizing.
• Operating a function other than Mute will release resizing.
• As zooming is processed digitally, the image quality is degraded in larger zoom
ratio.
• During resizing or moving the zooming area, the image may be distorted.
■ Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector's images and sound can be
turned off.
Press the remote control's MUTE button.
The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)
Notes
• The
icon will appear while mute is in effect.
• Operating any other functions will also cancel the muting.
■ Changing picture mode
The projected NCE mode can be selected.
Press the remote control's NCE button.
1
The NCE mode menu appears.
1/2/3
2
Select a mode using
Though the
button is not pressed, the NCE mode
changes as the setting is changed and the display turns off
automatically in a few seconds.
Note
• [NCE mode] of the Image adjustment menu has the same
function
p.37
.
Remote
Control
Remote
Control
then press
.
31
Advertisement
Table of Contents
