HMS BE3601-i Manual Instruction page 28

Pace
Distance
◆4.Operation instruction
■4.1Treadmill operation instruction
4.1.1Standby mode operation
Put the special power wire into treadmill socket, another end of power wire has be connected to the environment
working voltage (the working voltage must be in conformity with requirements of the treadmill). Connect the power,
treadmill enter to standby mode, time window shows environment temperature, PROGRAM window shows preset
4.1.2In standby mode, press START
data accordingly. Matrix window display runway and laps, each lap is 400 meters. At the same time, you can select
speed or incline key
■ 4.1.3 Exercise program operation instruction
The treadmill apply four types of configurable heart-rate control programs, each with a different level of intensity,
users can choose the appropriate level of intensity to train according to their age, gender, weight and other
parameters and different purposes of exercise.
When you use intelligent program, you need to use setting key
key to confirm; Press direct key to select intelligent program as you like, press Stop/pause key
when selected, then you can select another intelligent program after exit.
Calor
Incline
ie
Program
Heart rate
program ,other windows will shows initial value "0".
key, treadmill start to running, each window will show current exercise
to adjust speed or incline class as you like, press Pause/Stop key
stop running.
Speed
HRC
Time
to proceed relevant setting, press Enter
Fault indication
Program graphics
to pause or
to exit
27