Driver Memory Seat - If Equipped - Chrysler Pacifica 2018 Owner's Manual

Driver Memory Seat — If Equipped
The Memory Buttons (1) and (2) on the driver's door panel
can be programmed to recall the driver's seat, outside
mirrors, and radio station preset settings. Your key fobs can
also be programmed to recall the same positions when the
unlock button is pushed.
Driver Memory Switch
1 — Memory Button 1
2 — Set Button
3 — Memory Button 2
Your vehicle may have been delivered with two key fobs,
one key fob can be linked to each of the memory positions.
GETTING TO KNOW YOUR VEHICLE 57
Programming The Memory Feature
To create a new memory profile, perform the following:
1. Cycle the vehicle's ignition to the ON/RUN position (do
not start the engine).
2. Adjust all memory profile settings to desired prefer-
ences (i.e., driver's seat, outside mirrors and radio
station presets).
3. Push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The instrument cluster dis-
play will show which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK,
but the vehicle must be in PARK to recall a memory
profile.
• To set a memory profile to your key fob, refer to
"Linking And Unlinking The Remote Keyless Entry Key
Fob To Memory" in this section.
3