Stowing The Crossbars - Chrysler Pacifica 2021 Owner's Manual

S T C
TOWING HE ROSSBARS
1. Starting with one crossbar, completely loosen
the thumb screws at both ends. Lift the
crossbar away from the matching letter to
remove it from the deployed position. Repeat
with the other crossbar.
CAUTION!
Use care when removing and handling the
crossbars to prevent damage to the vehicle.
2. Starting with the one crossbar, bend up the
pivot supports at each end.
Crossbar Pivot
3. Then, position the crossbar along the correct
side rail. Make sure the letters on the crossbar
align with the matching letters on the side rail.
Stowing Crossbars
GETTING TO KNOW YOUR VEHICLE
4. The crossbar will nest fully within the side rail.
Crossbar To Side Rail
5. Once the driver's side crossbar is in place,
tighten the thumb screws completely.
Tightening Crossbar
105
2