Driver Memory Seat - If Equipped - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 27
WARNING! (Continued)
Do not ride with the seatback reclined so

that the shoulder belt is no longer resting
against your chest. In a collision you could
slide under the seat belt, which could result
in serious injury or death.
CAUTION!
Do not place any article under a power seat
or impede its ability to move as it may cause
damage to the seat controls. Seat travel may
become limited if movement is stopped by an
obstruction in the seat's path.
Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted
up or down. Pull upward or push downward on
the front of the seat switch. The front of the seat
cushion will move in the direction of the switch.
Release the switch when the desired position
has been reached.
Power Lumbar — If Equipped
Vehicles equipped with power driver or
passenger seats may also be equipped with
power lumbar. The power lumbar switch is
located on the outboard side of the power seat.
Push the switch forward or rearward to increase
or decrease the lumbar support. Push the
switch upward or downward to raise or lower the
lumbar support.
Power Lumbar Switch
Driver Memory Seat — If Equipped
This feature allows the driver to store up to two
different memory profiles for easy recall
through a memory switch. Each memory profile
contains desired position settings for the driver
seat, side mirrors, and power tilt and telescopic
steering column (if equipped) and a set of
GETTING TO KNOW YOUR VEHICLE
desired radio station presets. Your key fob can
also be programmed to recall the same posi-
tions when the unlock button is pushed.
NOTE:
Your vehicle is equipped with two key fobs, one key
fob can be linked to memory position 1 and the
other key fob can be linked to memory position 2.
The memory seat switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate

the memory save function.
The (1) and (2) buttons which are used to

recall either of two pre-programmed memory
profiles.
Memory Seat Switch
27
2