Table of Contents
Advertisement
Manual Adjustment (Rear Seats)
Folding Rear Seat
The rear seatbacks can be folded forward to provide
an additional storage area. To fold the rear seatback,
pull on the loops located on the upper seatback.
NOTE:
These loops can be tucked away when not in use.
Rear Seat Loop
After releasing the seatback, it can be folded for-
ward.
NOTE:
You may experience deformation in the seat cush-
ion from the seat belt buckles if the seats are left
folded for an extended period of time. This is nor-
mal and by simply opening the seats to the open
position, over time the seat cushion will return to its
normal shape.
When the seatback is folded to the upright position,
make sure it is latched by strongly pulling on the top
of the seatback above the seat strap.
WARNING!
• Be certain that the seatback is securely locked
into position. If the seatback is not securely
locked into position, the seat will not provide
the proper stability for child seats and/or pas-
sengers. An improperly latched seat could
cause serious injury.
• The cargo area in the rear of the vehicle (with
the rear seatbacks in the locked-up or folded
down position) should not be used as a play
area by children when the vehicle is in motion.
They could be seriously injured in a collision.
Children should be seated and using the
proper restraint system.
Driver Memory Seat — If Equipped
This feature allows the driver to store up to two
different memory profiles for easy recall through a
memory switch. Each memory profile contains de-
sired position settings for the driver seat, side mir-
rors, and power tilt and telescopic steering column
(if equipped) and a set of desired radio station
presets. Your key fob can also be programmed to
recall the same positions when the unlock button is
pushed.
NOTE:
Your vehicle is equipped with two key fobs, one key
fob can be linked to memory position 1 and the
other key fob can be linked to memory position 2.
The memory seat switch is located on the driver's
door trim panel. The switch consists of three but-
tons:
• The set (S) button, which is used to activate the
memory save function.
• The (1) and (2) buttons which are used to recall
either of two pre-programmed memory profiles.
19
Advertisement
Table of Contents
