Chrysler Pacifica 2021 Owner's Manual page 115

Coolant Temp
Displays the actual coolant temperature.
Transmission Temp
Displays the actual transmission temperature.
Oil Temp
Displays the actual oil temperature.
Oil Pressure
Displays the actual oil pressure.
Oil Life
Displays the remaining engine oil life as a
percentage.
To reset the Oil Life, you must hold the OK button.
The "Hold OK to Reset" instruction will be
displayed at all times, but the following conditions
will need to be met in order to reset Oil Life:
The ignition must be in the ON/RUN position

If the conditions are met, holding the OK button will
reset the gauge and the numeric display will return
to 100%.
If the conditions are not met, a pop-up message
will display for five seconds, describing the
required conditions, and then the Oil Life screen
will reappear.
Battery Voltage
Displays the actual battery voltage.
Engine Hours — If Equipped
Displays the number of hours of engine operation.
Driver Assist
Push and release the up or down
button until the Driver Assist display icon is
highlighted in the instrument cluster display.
Fuel Economy
Push and release the up or down
button until the Fuel Economy Menu item is
highlighted in the instrument cluster display. The
Fuel Economy Menu will display the following:
Two submenu pages that can be toggled

between using the left and right
buttons; one with Current Value displayed and
one without the Current Value displayed:
Average Fuel Economy

(MPG, L/100 km, or km/L)
Range To Empty (miles or km)

Current Fuel Economy

(MPG, L/100 km, or km/L)
The Max and Min values will correspond to

the particular engine requirements
Hold OK to reset average fuel economy

information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Trip Info
Push and release the up
button until the Trip Menu item is highlighted in the
instrument cluster display. Push the left
right arrow button to scroll through the Trip A
and Trip B submenus. The Trip information will
arrow
display the following:
Distance

Average Fuel Economy

Elapsed Time

arrow
Hold the OK button to reset feature information.
Stop / Start – If Equipped
Push and release the up
button until the Stop/Start menu title is displayed
in the instrument cluster display.
arrow
Audio
Push and release the up
button until the Audio Menu displays in the
instrument cluster display.
113
or down arrow
or
3
or down arrow
or down arrow