Pcl Emulation - Xante CL30 User Manual

All manuals and user guides at all-guides.com
The default settings are
Item Value
Resident; DIMM0;
FONT SOURCE
Downloaded
I000, C001, S001
FONT NO.
0.44 cpi to 99.99 cpi in
FONT PITCH
0.01 cpi increments
Default = 10.00 cpi
4.00 to 999.75 point, in
FONT HEIGHT
0.25 point increments
Default = 12.00 point

PCL emulation

bold
Description
Selects location of the PCL
font used.
DIMM0 is displayed only when
font DIMM ROM exists in the
slot.
Downloaded only appears if
fonts have been downloaded
to the printer.
Sets the PCL font number.
I = internal (resident font);
I000 = Courier.
C = Font stored in the printer's
Flash memory.
S = downloaded soft font,
stored on the printer's internal
hard disk drive. Applies only to
printers with a hard disk drive
installed.
Sets the font width in
characters per inch. Only
displayed if the font is a fixed
spacing outline font.
Sets the font point size.
Applies only to fixed fonts
(does not apply to proportional
fonts).
Chapter 3 - Setting Up • 49
.