Switching Off - Xante CL30 User Manual

All manuals and user guides at all-guides.com

SWITCHING OFF

In normal circumstances the power save facility should be used to
avoid having to switch the printer off. However if you do wish to
switch the printer off manually, please carry out the following
procedure:
Ready Ready
Attention Attention
• NEVER turn the printer off while it is printing.
• If the optional hard disk has been installed, The
following procedure MUST BE FOLLOWED before
turning off to protect any data that is stored on the hard
disk.
• It is recommended that you follow this shutdown
procedure each time the printer is switched off for any
reason.
• After switching the printer OFF, wait at least 10 seconds
before switching it ON again. This allows the internal
power levels to drop. Switching on too soon could
cause the printer to malfunction.
1. Press the MENU button until the
then press the SELECT button.
2. Press the Select button again to
sequence.
3. When
PLEASE POWER OFF SHUTDOWN COMPLETED
turn the printer off using the power switch.
Menu Menu
Item Item
Online Online
CAUTION!
SHUTDOWN MENU
the shutdown
EXECUTE
Chapter 3 - Setting Up • 72
Value Value Select Select
Cancel
is displayed;
is displayed,