Xante CL30 User Manual page 200

All manuals and user guides at all-guides.com
Longitudinal black stripes
Possible cause
Image drum is damaged.
Toner is low.
Periodic black lateral lines or
spots.
The image drum has been
exposed to light.
Faint shading on unprinted sections
Possible cause
Paper has been
affected by static
electricity.
Paper is too thick.
Toner is low.
Blurred letter edges
Possible cause
LED is dirty.
Cannot print desired color
because toner is low.
Black formation method
does not match application.
Chapter 11 - Troubleshooting • 192
Rem edy
Replace image drum.
Change toner cartridge.
•
If the lines or spots occur at intervals of
approximately 44 - 94 mm, the image drum
(green tube) is damaged or dirty. If damaged,
replace the image drum cartridge. If dirty, wipe
the image drum gently with soft tissue. If this
does not work, replace the image drum.
•
If the lines or spots occur at intervals of
approximately 113 mm, the fuser roller is
damaged. Change the fuser unit.
Remove the image drum from the printer
and store it in a dark place for several hours.
If this does not work, replace the image
drum.
Rem edy
Store paper within specified temperature and
humidity levels.
Use recommended paper.
Change toner cartridge.
Rem edy
Clean LED with lens cleaner or soft tissue.
Replace toner cartridge.
Open the printer driver and set black
formation to CMYK.