Xante CL30 User Manual page 203

All manuals and user guides at all-guides.com
Toner rubs off the printed surface.
Possible cause
Media Weight and Media Type
settings may not be appropriate.
Packing materials left on the fuser
when it was installed.
Chapter 11 - Troubleshooting • 195
Rem edy
Set the value of media weight to the
next heaviest one.
Careful! Fuser may be HOT! Open the
top cover and check to be sure that all
packing materials were removed from
the fuser. To remove the fuser, see
"Changing the fuser unit" on page 167.