Chapter 11 - Troubleshooting; Lcd Messages - Xante CL30 User Manual

All manuals and user guides at all-guides.com

Chapter 11 - Troubleshooting

LCD MESSAGES

The liquid crystal display (LCD) on the control panel indicates the
printer status and if there is a problem with the printer. Status and
error messages are listed below together with an explanation of what
each message means:
LCD Message
***** DRUM NEAR LIFE
***** EMPTY
***** NEAR END
***** TONER LOW
***** TONER SENSOR
ERROR
BELT UNIT MISSING
CANCELLING JOB
CENTRO I/F ERROR
C H AN G E ***** IM AG E D R U M
CHANGE BELT UNIT
CHANGE FUSER UNIT
CHANGE PAPER TO *****
CHECK *****
CHECK BELT UNIT
CHECK DUPLEX
Chapter 11 - Troubleshooting • 175
Meaning
An image drum is nearing the end of its life.
(***** indicates color)
Warning that Tray ***** is empty. MP Tray is Tray
0.
The paper in the selected ***** is nearly finished.
(***** indicates paper tray).
Toner is low (***** indicates color).
Error with the toner sensor (***** indicates
color). Call for service.
Transfer belt unit is missing.
Cancelling the current job.
Centronics interface error (parallel interface).
Change the image drum (***** indicates color).
Change the transfer belt.
Change the fuser unit.
Paper must be changed to correct paper size
and/or media type (***** indicates size or media
type).
Check Tray ***** for paper jam. MP tray is Tray
0.
Check the transfer belt for paper jam, correct
installation, etc.
Check the duplex unit for paper jam, correct
installation, etc.