Run Maintenance Cycle Before Printing - Xante CL30 User Manual

All manuals and user guides at all-guides.com
4. The document then can be printed or deleted using the
procedures given below.
Printing copies
MENU ITEM VALUE SELECT
0 1
ON LINE ON LINE
4 5
1. Press the MENU button to access the
press the SELECT button.
2. Enter the personal ID number you selected above using the
buttons on the printer control panel.
3. Press the VALUE button until
is displayed.
4. Press the SELECT button to print the document.
Deleting the stored job from the hard disk drive
1. Press the MENU button to access the
press the SELECT button.
2. Enter the personal ID number you selected above using the
buttons on the printer control panel.
3. Press the VALUE button until
is displayed.
4. Press the CANCEL button to delete the remaining copies of the
document.
5. When the deletion confirmation message appears, confirm by
pressing the SELECT button.

Run Maintenance Cycle Before Printing

This option allows you to improve your print quality if you suspect
there is a problem with printing, such as too much graininess in the
print.
1. Select Run Maintenance Cycle Before Printing
printer to clean itself automatically before printing.
Chapter 5 - Mac OS 8.6-9.2.2 Operation • 106
2 3
CANCEL
6 7
PRINT JOBS MENU
or the required job name
ALL JOBS
PRINT JOBS MENU
or the required job name
ALL JOBS
to force the
and
and