Problems Printing From Macintosh - Xante CL30 User Manual

All manuals and user guides at all-guides.com

PROBLEMS PRINTING FROM MACINTOSH

Cannot configure for USB connection.
Possible cause
USB cable does not
meet specifications.
Interface is disabled.
Configuration
procedure was not
correctly followed or
cancelled.
USB cable is
disconnected or faulty.
A USB hub is being
used.
Chapter 11 - Troubleshooting • 189
Rem edy
Use USB cable to specification Ver.1.1.
Check that USB interface is set to Enable.
Configure again from the beginning.
Reconnect or try another cable.
The printer cannot be used with a USB hub.
Connect the printer and computer directly.