Xante CL30 User Manual page 198

All manuals and user guides at all-guides.com
Cannot print.
•
PRNUSBX WRITE ERROR
Possible cause
Interface is disabled.
Printer is switched OFF.
Printer interface cable is
disconnected.
A converter, buffer,
extension cable or USB
hub is being used.
Printer driver output port
is incorrect.
Printer is not selected in
the printer driver.
Incorrect printer driver is
being used.
Printing is slow.
Possible cause
Print processing is carried
out by the computer.
Data is too complex.
Printer requests paper size change to continue printing.
Possible cause Rem edy
Paper loaded in tray is Either change paper in tray to match size
different size from that formatted in application and press ONLINE to
formatted in software continue, or continue printing on existing paper by
application. pressing ONLINE.
Chapter 11 - Troubleshooting • 190
is displayed.
Rem edy
In the printer menu settings, enable Parallel or
USB interface.
Switch ON.
Reconnect the printer interface cable.
Test by connecting printer and computer
directly.
Set correct output port to which the printer
interface cable is connected.
Select the printer or set to default printer.
Delete this printer driver and install correct
printer driver.
Rem edy
Use a computer with a faster processor.
Set lower print resolution in the printer driver
Simplify data.